This gauge will switch off automatically when the aircraft bus voltage drops to zero or if the aircraft bus voltage drops below FG_GLOBAL_MIN_VOLTAGE value if set.

     Side Buttons (Off = 0, On = 1)

 

     Instructions Page (Off = 0, On = 1)

 

     Side Button Labels (Off = 0, On = 1)

 

     Menu Item Index (0 to 5)

     0 = Menu Closed

     1 = Version & Info

     2 = Side Buttons

     3 = AP APR ON / OFF

     4 = Glass Reflection

     5 = Brightness Control

 

SIMCONNECT Vars Used:

Plane heading degrees magnetic,radians

NAV TOFROM:1,enum

NAV obs:1,radians

NAV CDI:1,number

NAV GSI:1,number

AUTOPILOT APPROACH HOLD,bool

AUTOPILOT GLIDESLOPE HOLD,bool

ADF SIGNAL:1,number

ADF radial:1,radians

NAV HAS NAV:1,bool

NAV RADIAL:1,radians

NAV HAS NAV:2,bool

NAV radial:2,radians

Autopilot heading lock dir,radians

NAV obs:1,degrees

AUTOPILOT HEADING LOCK DIR,degrees

Plane heading degrees magnetic,degrees

NAV DME:1,nmiles

 

 

(not all vars used in every gauge)

 

     Variable used for dial acceleration (Off = 0, On = 1)

 

     Brightness value of physical FIP's. Affects all physical gauges (20-250)

 

     Variable used when editing Global or individual Brightness (0-1)

     0 - Global Brightness

     1 - Individual Brightness

 

     Glass Reflection (Off = 0, On = 1)

 

     Toggle visibility of Mini Menu LED (0 = On, 1 = Off)

 

     Background Colour (0 to 3)

     1 = Grey panel with grey gauge face

     2 = Blue grey panel with grey gauge face

     3 = Dark grey panel with black gauge face

     4 = Dark blue panel with black gauge face.  

 

     Background Colour (Black = 0, Blue = 1 )

 

     Minimum voltage before gauge electronics turns off (-1 to 150)

     -1 = Disabled

     0 - 150 = Off Voltage Level

 

     Internal Variable - Used to store off voltage value - do not edit

  

     Night Lit Mode (Off = 0, On = 1)

 

     Shared variable for switching inHg and MB (0 to 1)

     0 = inHg

     1 = Millbars

 

  Background Colour (0 to 6)

     0 = Grey

     1 = Black Dial Face

     2 = Darker Gauge & Dial Face

     3 = Black & No Gauge GFX

     4 = Grey - Original Design

     5 = Black Dial Face - Original Design

     6 = Darker Gauge & Dial Face - Original Design

   

     Internal variable used to read current voltage

 

1.5.000

     1) SPAD.neXt 0.9.15 Compatibility (Convert "PRESS" to "PRESSSHORT") Fixes short and long press both firing on long press.

     2) Menu system upgraded

     3) New gauge brightness code using SPAD brightness variables.

     4) Can control global or individual gauge brightness in gauge (Profile saved settings)

     5) Added Blank sidebar with labels

1.5.000 - New Custom Virtual Power supports ALL aircraft volt variables - See https://fipgauges.com/customfeatures.php

1.4.011 - Added sidebar blanking plate option

1.4.010 - Virtual Power Warning added to Menu

1.4.009 - Changed ILS localiser and Glide Slope Variables (More compatible)

1.4.008 - Changed heading from gyro to magnetic

1.4.007 - Tweaked voltage monitoring to better support MSFS2020. Added Monitoring for Battery Bus

1.4.006 - SPAD.neXt 0.9.7.x Variable Scope Compatibility

1.4.005 - Added Heading Bug to Digital. Automatic Dial Acceleration added to HDG and CRS

1.4.004 - Added Brightness Control to Mini Menu

1.4.003 - Turns on/off with avionics and no voltage.

1.4.002 - VOR1, VOR2 and ADF pointers only displayed when signal is received for each.

1.4.001 - Resized Text to become compliant with SPAD.neXt scaling changes

1.3.000 - Applied all GA HSI fixes and added side button and Mini Menu Support

1.2.001 - SPAD.neXt offset compliancy changes (legacy code no longer supported)

1.2.000 - Updated some missing bitmaps and removed invalid references

1.1.000 - Public Release

1.0.000 - Beta Release